Spintek Filtration Process Questionnaire

Required Fields *

Date: July 4, 2008 Prepared By: *
Company Name:
Address:
City:	State:	ZIP:
Country
Phone Number: *	Fax Number:	E-Mail Address:

Briefly describe process:

Describe sample of solution to be provided:

Is the purpose of the SpinTek system to:
Concentrate Clarify Fractionate

What are the desired results as to level of concentration, clarity, fractionation of the sample:

How will the concentrate from the SpinTek system be handled?

Is the SpinTek system being considered for this application to meet regulatory concerns, recycling of solution, improvement of filtration quality, reduce plant operating cost or other?

Temperature that the sample solution is normally processed at:

Minimum: C/F

Maximum: C/F

Average: C/F

Feed Water Analysis:

Suspended Solids (TSS)
Dissolved Solids (TDS)
Total Solids (TS)
Chem Oxy Demand (COD)
Bio Oxy Demand (BOD)
Odor
Conductivity
pH
Oil & Grease
TKN
Color
Turbidity (NTU)
SDI

Have membrane systems been used on this sample before and if so what type of system, type of membrane and level of filtration:

What were the problems with previous membrane system? (check all that apply)
Membrane fouled
Low flux rates at high solids concentration
Poor product quality
Temperature limitations of membranes
High capital cost of full scale system
High operating cost of full scale system
Chemical incompatibility with membranes - potential
Concentration Limitations of System
Other:

Process Requirements:

Daily Volume:
Days per week:
Peak Flow Rate:
Hours per day:
Expansion Requirements:

Additional Requirements of SpinTek Systems:

Attach Flow Sheet Drawing:

Additional Comments: